Product description
Neutral Foam Shampoo
- 2-in-1 Car Shampoo: Hand Wash with Mitt and Softening Pre-Wash with Foam Gun
- Ultra-concentrated neutral shampoo with a gloss-enhancing action
- Respects previously applied protective coatings
- Higher-than-average foaminess compared to market standards
- Highly dilutable: one bottle allows for up to 50 washes
- Bubble Gum fragrance
Neutral Foam Shampoo from Mafra's Maniac Car Detailing Line is a 2-in-1 ultra-concentrated pH-neutral shampoo with a gloss-enhancing effect. Ideal for manual car washing using the two-bucket method or as a pre-wash with a Foam Gun. Its formula creates a lubricated foam film, making it safe on all surfaces without the risk of streaks or halos.
A proper pre-wash removes 80% of coarse dirt, reducing the risk of damage to the car's paintwork during the washing phase.
With above-average foaminess, its intense and uniform lubricating foam encapsulates dirt, making it easier to remove during rinsing.For foaming application, dilute the product in a 1:10 ratio (1 part product to 10 parts water).Once diluted, follow these steps:
- Spray the solution over the entire vehicle, starting from the bottom and working your way up.
- Let the foam sit for 3 to 5 minutes, allowing it to act, ensuring it does not dry on the surface.
- Rinse with high-pressure water, starting from the top and moving downward.
The product’s easy rinsability allows for quick foam removal without leaving residues.
Hand Wash with the Two-Bucket Method
Step 1
- Dilute Neutral Foam Shampoo at 1:400 (3 caps of product in a bucket with 10L of water).
- Use a second bucket with clean water to rinse the microfiber wash mitt.
Step 2
- Work on a wet vehicle, starting from top to bottom.
- Wash small sections at a time without applying pressure to the surface.
Step 3
- Rinse the treated surfaces thoroughly.
Step 4
- Dry the car using an ultra-absorbent Super Dryer towel.
Wax Safe Technology: A product suitable for frequent and maintenance washes, designed to preserve protective coatings while effectively removing dirt.
Neutral Foam Shampoo is the perfect product for frequent and maintenance washes.
But what is a maintenance wash?
A maintenance wash aims to maintain the current condition of your vehicle, whether it's simply clean or also protected. Typically, a maintenance wash is done on a weekly or bi-weekly basis after limited mileage.
For a maintenance wash, it’s recommended to use Neutral Foam Shampoo in its two applications:
- With a foam lance to perform a thorough pre-wash and remove coarse dirt.
- With the two-bucket washing method for manual washing.
If the car has traveled a high mileage or has been exposed to the elements?
In this case, we would be dealing with heavily bonded dirt, the traffic film. The recommendation is to combine Neutral Foam Shampoo with our Foam Gun Prewash, a foaming pre-wash with a deeper cleaning action, to be used either with a manual pump sprayer or a foam lance. After performing the pre-wash with Foam Gun Prewash, you can proceed with the manual wash using Neutral Foam Shampoo.
If, during drying, you notice that you forgot to rinse a part of the car? Or if it was left in the sun for too long, causing the shampoo to dry?
In this case, our recommendation is to clean it with Exterior Quick Detailer, a 3-in-1 dry cleaner that polishes, cleans, and protects, ideal for easily and safely removing any stains or streaks during the post-drying or post-wash finishing stages.
















Reviews
There are no reviews yet.